The Model 750 in-ground hydraulic swing gate operator is designed for underground installation in residential applications.

Features include:

• Power and invisibility make the 750 ideal for large, ornate gates
• The drive unit is set in the ground while the pump unit is above the ground
• Equipped with a hydraulic bypass for extra anti-entrapment protection
• Versatile FAAC control panel offers six operating modes, including garage-door-like operation and a HOLD OPEN function
• Hydraulic locking in the opened and/or closed positions
  Convenient manual release is standard

Model 750 Kit Includes:

• One or two pump motor assemblies
• One or two drive units with metal enclosure and top
• One or two 33 ft lengths of flex hose & one or two connector kit
• One or two foundation plates
• One 455 D control panel
• One 14 x 16 in. weather resistant UL Listed fiberglass enclosure
• Two photobeam sets for opening and closing reversing devices
• One plug-in radio receiver
• Two radio transmitter
• 115 VAC receptacle for accessories (5 amp max.)
• ON/OFF switch controlling power to control panel, accessories and plug outlet
• Large pre-wired terminals for easy wiring to control panel
  Test button
• Two or four warning signs

NOTE: FAAC packages their operators to be fully UL-325 compliant, right out of the box, which means there’s no need to purchase any additional peripherals.

The Model 400 heavy duty hydraulic swing gate operator is specifically designed for situations needing maximum versatility, such as apartment, subdivision, commercial/industrial and certain residential applications.

Features include:

• Its power makes it ideal for large, ornate gates
• Perfect for situations needing up to 125 degrees of swing
• Models available with locks in the opened and/or closed positions
• Operator is mounted inside the gate but still allows gate to open to the inside or outside
• A convenient manual release is standard
• The versatile FAAC control panel allows for six operating modes, including garage-door-like operation and a HOLD OPEN function
• A battery back-up unit is available

Model 400 Kit includes:

• One or two hydraulic gate operators with mounting hardware
• One 455 D control panel
• One 14 x 16 in. weather resistant UL Listed fiberglass enclosure
• Two photobeam sets for opening and closing reversing devices
• One or two manual release keys
• One plug-in radio receiver
• Two radio transmitters
• 115 VAC receptacle for accessories (5 amp max.)
• ON/OFF switch controlling power to control panel, accessories and plug outlet
• Large pre-wired terminals for easy wiring to control panel
• Test button
• Two or four warning signs

NOTE: FAAC packages their operators to be fully UL-325 compliant, right out of the box, which means there’s no need to purchase any additional peripherals.

The Models 422 hydraulic swing operator is designed for single family residential use.

Model 422 features include:

• Designed for demanding single family residential use
• Can move a 900 pound gate leaf 90 degrees in 12 seconds
• Hydraulic locking in the opened and/or closed positions
• A convenient manual release is standard
• A battery back-up unit is available
• A high-speed version of the 422 is available for pedestrian gates

Model 422 Kit includes:

• One or two hydraulic gate operators with mounting hardware
• One 455 D control panel
• One 14 x 16 in. weather resistant UL Listed fiberglass enclosure
• Two photobeam sets for opening and closing reversing devices
• One or two manual release keys
• One plug-in radio receiver
• Two radio transmitters
• 115 VAC receptacle for accessories (5 amp max.)
• ON/OFF switch controlling power to control panel, accessories and plug outlet
• Large pre-wired terminals for easy wiring to control panel
• Test button

NOTE: FAAC packages their operators to be fully UL-325 compliant, right out of the box, which means there’s no need to purchase any additional peripherals.